[7]
Quality Information
Test Item
Content of Test
Test Condition
Note
High Temperature storage Endurance test applying the high
storage temperature for a long time.
+80?C , 240hrs 2
Low Temperature storage Endurance test applying the low storage
temperature for a long time.
-30?C , 240hrs 1,2
High Temperature
Operation
Endurance test applying the electric stress
(voltage & current) and the high thermal
stress for a long time.
+70?C , 240hrs 2
Low Temperature
Operation
Endurance test applying the electric stress
(voltage & current) and the low thermal
stress for a long time.
-20?C , 240hrs 1,2
High Temperature /
Humidity Operation
Endurance test applying the electric stress
(voltage & current) and the high thermal
with high humidity stress for a long time.
+60?C , 90% RH , 240hrs 1,2
Thermal Shock resistance Endurance test applying the electric stress
(voltage & current) during a cycle of low
and high thermal stress.
-30
℃
30 min~+80
℃
30 min,
Change time:5min, 20 Cycles
Vibration test Endurance test applying vibration to
simulate transportation and use.
10-55Hz , 1.5mm amplitude.
2 hours in each of 3 directions
X,Y,Z. For 6 hours total
3
Static electricity test Endurance test applying electric static
discharge.
VS=4KV, RS=330kΩ, CS=150pF
Five times
Note 1:
No condensation to be observed.
Note 2:
Conducted after 4 hours of storage at 25
?C, 0%RH.
Note 3:
Test performed on product itself, not inside a containe
r.
Precautions for using LCDs/LCMs
See Precautions at
www.newhavendisplay.com/specs/precautions.pdf
Warranty Information
See Terms & Conditions at
http://www.newhavendisplay.com/index.php?main_page=terms